Automatic Signature on End of Messages

[previous] [next] [table of contents] [index]

Some users like to have a few lines added automatically at the bottom of each message they send.

This is easy to do with comp. Put the line(s) at the end of your components file, and they'll be copied into the draft automatically. Unless you use its -noprepend switch, prompter will prompt you with:

--------Enter initial text
and wait for you to type CTRL-D before it copies the rest of the components file into the draft. Here's a typical components file with a signature at the end:
To:
cc:
Fcc: outbox
Subject:
--------

-- Emma H. User, ehuser@bigcorp.xxx.yyy, phone +1 301 456-7890
You can't add a signature to the template files for the forw or repl -filter commands, though. That's because they add their text (the forwarded message or copy of the original message) after the contents of the forwcomps or replcomps file, respectively. So your signature would be at the start of the draft message.

In repl, you can handle that by adding the signature to the end of your -filter file. mhl reads the filter file, so use a colon (:) before each line of the signature, as shown in the following example:

:-- Emma H. User, ehuser@bigcorp.xxx.yyy, phone +1 301 456-7890
It's hard to use one of these methods on forwarded messages because the signature goes in the wrong place whether you prepend or noprepend. Some answers are: If you always send MIME messages, and if your signature is long, it's courteous to put your signature in a separate part with a description that tells people what it is. They don't have to read the signature if they know who you are and how to reach you.
To:
cc:
Fcc: outbox
Subject:
--------

#<text/plain [Signature]

\     |\.-./|    Cynthia Pribram * System Administrator
 \\   |'a a`|    O'Reilly & Associates, Inc.
  \\ =(= v =)=   103A Morris Street * Sebastopol, CA 95472
   \\ /\_^_/\    (800)998-9938 * (707)829-0515 x 218 * fax: (707)829-0104
    \|  \_/  |   cynthia@ora.com
     \ || || /
    (__||-||__)
       ^^ ^^
In a repl filter file, remember to add the colon (:) to the start of each line of the body -- including the #<text/plain directive.

[Table of Contents] [Index] [Previous: Periodic Cleanup, Checking, etc. with cron and at] [Next: Chapter Introduction (New Versions of MH Commands)]


Last change $Date: 1996/06/06 15:08:36 $

This file is from the third edition of the book MH & xmh: Email for Users & Programmers, ISBN 1-56592-093-7, by Jerry Peek. Copyright 1991, 1992, 1995 by O'Reilly & Associates, Inc. This file is freely-available; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation. For more information, see the file copying.htm.

Suggestions are welcome: Jerry Peek <jerry@ora.com>

Questions or problems regarding this web site should be directed to Steve Gielda.
Copyright 1999 www.cotse.com.  All rights reserved.
Last modified: Friday April 02, 1999.