An MH Profile, in General

[previous] [next] [table of contents] [index]

An introductory section gave an overview and showed a short MH profile. Here's more information and a bigger MH profile.

An MH profile entry starts with the name of a command or other parameter followed by a colon (:). If the entry is longer than one line, indent all lines except the first with space or tab character(s).

There are several kinds of entries in your MH profile:

  1. Entries for individual MH commands, such as repl and inc. These entries start with the name of the command and a colon. The other part of each entry is one or more command-line parameters that you'd like the command to use by default. For example, the entry below tells repl first to ask you who should get copies of your reply, then to start the emacs editor:
    repl: -query -editor emacs
    
    You use the same syntax for other MH commands, including the command versions explained in the Chapter New Versions of MH Commands. Lines 32-44 and lines 45-70 of the next Example are this kind.
  2. Other entries apply to (in general) more than one MH command. For example, the following entry tells MH commands that you want to use the vi editor wherever possible:
    Editor: vi
    
    Your online mh-profile(5) manual page has a list of these. See lines 1-18 of the next Example.

    In most cases, those general settings are overriden by settings you make for individual MH commands. For instance, repl: -editor emacs would override a setting like Editor: vi when you use repl.

  3. MIME messages are handled by the mhn command. mhn can have its own profile entry (mhn:). It also uses a set of profile entries that start with mhn-, like mhn-store-text/plain:. (mhn will also read two other profiles: mhn_defaults and $MHN.)
  4. exmh version 1.5 uses a few MH profile entries of its own. xmh and mh-e don't have any special profile entries.

    If you use both MH and front-ends (like xmh), be careful of conflicts. MH profile entries that work fine with one may cause problems with the other. The Section Conflicts Between xmh and MH Customization has some tips for xmh that you can also apply to mh-e and exmh.

  5. You can make comments in the MH profile by typing an "impossible" command name, followed by a colon. For instance, if you don't have an MH command named comment (which you won't, unless you followed the steps for Making a New Command Version) -- you can use that as a label for comments. You can also add other characters, like XXX, to "comment out" an existing entry. Here's one way you might make a comment, and comment out an entry:
    comment: this isn't working now; figure out why!
    XXXrepl: -querry
    
    Lines 1-3, 37, and others in the Example below, show another way to make comments.
  6. Don't leave blank (empty) lines in the MH profile.
This example shows a highly-customized MH profile. The line numbers to the left of each line (like 12>) are not part of the file; they are for reference only.

NOTE for users of the online version of this book: This example is followed by long explanations. To avoid jumping between the example and its explanation, it's a good idea to open a new browser window to show the example. (Check your browser's menu for a command like New Web Browser or Open in New Window). Then, use the original browser to read the explanation while you view the example in the second browser window.

Example: A big MH profile

 1> #:
 2> #: First section: Overall setup for MH
 3> #:
 4> Aliasfile: aliases
 5> Alternate-Mailboxes: ehuser@*.xxx.yyy.zzz, emma@animals*,
 6>     ehuser@quack.phl.ph.com, *uucpit!ehuser
 7> Draft-Folder: drafts
 8> Folder-protect: 750
 9> Msg-protect: 640
10> library: /usr/local/lib/mh
11> lproc: show
12> Path: .Mail
13> Previous-Sequence: pseq
14> prompter-next: vi
15> rmmproc: /home/ehuser/.bin/rmmer
16> Sequence-Negation: not
17> showproc: mhl
18> Signature: Emma H User
19> Unseen-Sequence: unseen
20> vi-next: spel
21> #:
22> #: MIME setup (Overrides mhn_defaults.  Overridden by $MHN, if any.)
23> #:
24> automhnproc: mhn
25> mhn-charset-iso-2022-jp: %s | less
26> mhn-compose-text/x-tek: |gettek
27> mhn-private-cache: /home/ehuser/tmp/mhn-cache
28> mhn-show-text/enriched: %prichtext -e -p '%F'
29> mhn-show-application/postscript: %lghostview -safer '%F'
30> mhn-storage: /home/ehuser/mhn-storage
31> mhn-store-text/x-tek: |tekconvert '%m%P.%s'
32> #:
33> #: Lines for specific standard MH programs:
34> #:
35> anno: -inplace
36> dist: -annotate -inplace -editor distprompter
37> #: -nodashmunging only works if you give -filter or -format:
38> forw: -anno -inpl -form components -format -nodashmunging
39> inc: -form scan.time
40> mhl: -nobell
41> mhn: -norealsize
42> pick: -seq picked -list
43> repl: -query -nocc me -annotate -inplace -editor prompter.nopre
44> rmf: -interactive
45> #:
46> #: Stuff for new versions of MH programs and shell scripts:
47> #:
48> auto_forw_send: -draftfolder +drafts
49> bomb: -form bombcomps -anno -inpl -editor head -query -nocc me -nocc cc
50> checkm: -file /usr/spool/mail/ehuser -form scan.checkm -width 150
51> cur: cur -form scan.more -width 235
52> curlast: cur-last
53> fo: -fast
54> foll: -form follcomps
55> follx: -form follcomps -filter follxfilt -editor vi
56> l10: last:10
57> l20: last:20
58> l5: last:5
59> l: last
60> msgnums: -format %(msg)
61> prompter.nopre: -noprepend -rapid
62> push: -push -draftfolder +drafts -forward -verbose
63> rapid: -rapid -prepend
64> replx: -filter replxfilt -query -nocc me -anno -inpl -editor prompter.nopre
65> resend: -editor resend.fixmsg
66> #: for 'rn' replies... there's gotta be a better way!:
67> rn-ans: -editor rn-ans.fixmsg
68> showpr: -format 'Message %(msg)' -mhl
69> showv: -showproc more
70> thanks: -form thankscomps -anno -inpl -editor cat -nocc all -whatnow push
Let's take a look at some of the entries in the Example above. The file is divided into four arbitrary parts with a label block of comments above each part.

[Table of Contents] [Index] [Previous: MH and the Shell] [Next: Configuring mhn]


Last change $Date: 1996/06/06 15:08:27 $

This file is from the third edition of the book MH & xmh: Email for Users & Programmers, ISBN 1-56592-093-7, by Jerry Peek. Copyright 1991, 1992, 1995 by O'Reilly & Associates, Inc. This file is freely-available; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation. For more information, see the file copying.htm.

Suggestions are welcome: Jerry Peek <jerry@ora.com>

Questions or problems regarding this web site should be directed to Steve Gielda.
Copyright 1999 www.cotse.com.  All rights reserved.
Last modified: Friday April 02, 1999.